I can imagine-you are tired coming from work and you just want to sit down and relax with some quick snack but your Blender decided not to come on board!
You put your fruits inside the blender and everything is ready you switch on your blender but nothing comes on I mean fokol.This is what you should look at:
Check wires if not damaged/broken.
Check if there’s power coming to the blender.
Take out everything you put inside the blender put them on a safe place.
Take the silver part(where the wires comes from) and find a nice clean spot e.g table to work on.
Now before we open the blender take a good look at the inside of the silver part.There should be two switches on top.
Very carefully attentively plug the blender back on the wall and try to press the switches at the same time.Use plastic handle on a screwdriver to do that or rather get another person to help hold the blender when you press on the switches.Look at or check if the blender spins if it does spin then the problem lies on a sharp point where it applies pressure on the switches it could be broken.
You have to replace the whole top cover or you can get a glue and a long plastic point to repair that small problem.This is harder than it sounds trust GreatVince he knows.This is fun contact me for more information on how to make your own switch pressure press.
If that’s not the case you’ll have to open the silver part and check for brushes and the motor.You must consider consulting a local qualified Electronics Technician for further assistance as I am far from where you are.
Soon I will provide small few minutes video to help you to learn to do things yourself.
I thank you.